Filter
Top Products
2 - 8
SPEC
2nd ring
Type Taper ----
Dimensions (B × T) 1.2 × 3.6 mm
(0.04724 × 0.1417 in)
----
End gap (installed) 0.40 ~ 0.60 mm
(0.0157 ~ 0.0236 in)
0.95 mm
(0.0374 in)
Side clearance 0.03 ~ 0.07 mm
(0.0012 ~ 0.0028 in)
0.13 mm
(0.0051 in)
Oil ring
Dimensions (B × T) 2.8 × 2.8 mm
(0.1102 × 0.1102 in)
----
End gap (installed) 0.2 ~ 0.7 mm
(0.0079 ~ 0.0276 in)
----
Crankshaft:
Crank width “A” 62.95 ~ 63.00 mm
(2.4783 ~ 2.4803 in)
----
Runout limit C1 ---- 0.03 mm
(0.0012 in)
C2 ---- 0.03 mm
(0.0012 in)
Big end side clearance “B” 0.25 ~ 0.75 mm
(0.0098 ~ 0.0295 in)
1.00 mm
(0.0394 in)
Big end radial clearance “E” 0.010 ~ 0.025 mm
(0.0004 ~ 0.0010 in)
----
Balancer:
Balancer drive method Gear ----
Automatic centrifugal clutch:
Clutch shoe thickness 1.5 mm (0.06 in) 1.0 mm
(0.04 in)
Clutch-in revolution 1,960 ~ 2,240 r/min ----
Clutch-stall revolution 3,300 ~ 3,900 r/min ----
Item Standard Limit
B
T
B
T
E
A
B
C1
C2
MAINTENANCE SPECIFICATIONS