Filter
Top Products
4 - 40
ENG
RECOIL STARTER AND A.C. MAGNETO
2.Install:
●
Starter spring 1
●
Sheave drum assembly 2
N
OTE:
●
Mesh the spring hook 3 with the case slit,
then wind the spring clockwise into the case
from the larger to smaller diameter.
●
Mesh the sheave drum hook 4 with the
spring hook 5.
3.Install:
●
Spring 1
●
Friction plate 2
●
Nut
N
OTE:
Insert the spring hooks into the pawl side
holes.
4.Turn the sheave drum 3-turn clockwise to
give preload to the spring.
5.Install:
●
Starter handle 1
●
Cap 2
N
OTE:
●
Pass the rope through the case hole and
make a knot 3 on the rope so that the rope
is not pulled into the case.
●
Untie the knot 3 after making a knot 4
above the handle.
INSTALLING THE A.C. MAGNETO
1.Apply:
●
Sealant (Quick Gasket
®
) 1
(into the slit)
Sealant (Quick Gasket
®
):
P/N. ACC-11001-05-01
Yamaha bond No. 1215:
P/N. 90890-85505