Yamaha 5TE-F8197-10 Camper User Manual


 
7 - 21
DRIV
REAR AXLE/FINAL DRIVE GEAR AND DRIVE SHAFT
Shims are supplied in the following
thicknesses.
*****************************************************
Final drive pinion gear shim
Thickness (mm)
0.15 0.30 0.40
0.45 0.50 0.60
Ring gear shim selection
1.Select:
Ring gear shim(s)
*****************************************************
Selection steps:
To find the ring gear shim thickness B, use
the following formula.
c = a numeral (usually a decimal number)
on the final gear case either added to or
subtracted from 45
d = a numeral (usually a decimal number)
on the outside of the ring gear bearing
housing and added to 1
e = a numeral (usually a decimal number)
on the inside of the ring gear either
added to or subtracted from 35.00
f = bearing thickness (considered constant)
Example:
1) If 53 is stamped on the final gear case,
c = 45 + 0.53 = 45.53
2) If 05 is stamped on the ring gear
bearing housing,
d = 1 + 0.05
= 1.05
3) If “– 05 is stamped on the ring gear,
e = 35 0.05
= 34.95
4) f = 11.00.
Ring gear shim thickness:
B =
c
+
d
(
e
+
f
)
Bearing thickness
f
:
11.00 mm