– 51 –
ENG
BALANCER GEARS AND OIL PUMP
INSTALLING THE BALANCER DRIVE GEAR
AND BALANCER DRIVEN GEAR
1.Install:
●
Pin
●
Spring
●
Balancer drive gear
(onto the buffer boss)
N
OTE:
Align the punch mark a on the balancer drive
gear with the keyway b on the crankshaft.
2.Install:
●
Plate
N
OTE:
Install the plate with the identification mark “F”
facing away from the balancer drive gear.
3.Install:
●
Balancer driven gear
N
OTE:
Align the punch mark a on the balancer drive
gear with the punch mark b on the balancer
driven gear.
4.Install:
●
Lock washer
●
Balancer driven gear nut 1
N
OTE:
●
Place an aluminum plate 2 between the
teeth of the balancer drive gear 3 and
balancer driven gear 4.
●
Apply the molybdenum disulfide grease to
the thread of axles and nuts.
5.Bend the lock washer tabs along the
balancer driven gear nut.
New
T
R
.
.
60 Nm (6.0 m • kg, 43 ft • lb)