Filter
Top Products
8 - 7
CHAS
FRONT BRAKE
CAUTION:
Disc brake components rarely require
disassembly. DO NOT:
●
disassemble components unless
absolutely necessary;
●
use solvents on internal brake
components;
●
use spent brake fluid for cleaning; (use
only clean brake fluid)
●
allow brake fluid to come in contact with
the eyes, as this may cause eye injury;
●
splash brake fluid onto painted surfaces or
plastic parts, as this may cause damage;
●
disconnect any hydraulic connection, as
this would require the entire brake
system to be disassembled, drained,
cleaned, properly filled and bled after
reassembly.
REPLACING THE FRONT BRAKE PADS
N
OTE:
It is not necessary to disassemble the brake
caliper and brake hose to replace the brake
pads.
1.Measure:
●
Brake pad wear limit a
Out of specification → Replace the brake
pads as a set.
Brake pad wear limit:
1 mm (0.04 in)
2.Install:
●
Brake pads
●
Brake pad spring
N
OTE:
Always install new brake pads, brake pad shim
and brake pad spring as a set.