Filter
Top Products
2 - 4
SPEC
MAINTENANCE SPECIFICATIONS
ENGINE
Item Standard Limit
Cylinder head:
Warp limit ---- 0.03 mm
(0.0012 in)
Cylinder:
Bore size 84.500 ~ 84.510 mm
(3.3268 ~ 3.3272 in)
84.600 mm
(3.3307 in)
Taper limit ---- 0.05 mm
(0.0016 in)
Out of round limit ---- 0.01 mm
(0.0004 in)
Camshaft:
Drive method Chain drive (left) ----
Cam dimensions
Intake “A” 40.62 ~ 40.72 mm
(1.5992 ~ 1.6031 in)
40.52 mm
(1.5953 in)
“B” 32.18 ~ 32.28 mm
(1.2669 ~ 1.2709 in)
32.08 mm
(1.2630 in)
Exhaust “A” 40.62 ~ 40.72 mm
(1.5992 ~ 1.6031 in)
40.52 mm
(1.5953 in)
“B” 32.18 ~ 32.28 mm
(1.2669 ~ 1.2709 in)
32.08 mm
(1.2630 in)
Camshaft runout limit ---- 0.03 mm
(0.0012 in)
A
B
MAINTENANCE SPECIFICATIONS