Filter
Top Products
– 11 –
SPEC
Oil pump:
Oil filter type Foam ----
Oil pump type Trochoid ----
Tip clearance 0.15 mm (0.006 in) 0.20 mm
(0.008 in)
Side clearance 0.04 ~ 0.09 mm
(0.002 ~ 0.004 in)
----
Bypass valve setting pressure 78 ~ 118 kPa (0.78 ~ 1.18 kg/cm
2
,
11.3 ~ 17.1 psi)
----
Oil pressure (hot) 20 kPa (0.20 kg/cm
2
, 2.9 psi) at
1,500 r/min
----
Pressure check location Cylinder head ----
Shaft drive:
Middle gear backlash 0.1 ~ 0.3 mm (0.004 ~ 0.012 in) ----
Final gear backlash 0.1 ~ 0.2 mm (0.004 ~ 0.008 in) ----
Differential gear backlash 0.05 ~ 0.25 mm
(0.0020 ~ 0.0098 in)
----
Lubrication chart:
Item Standard Limit
Oil strainer
Transmission
Oil pump
Crank pin,
clutch
Oil filterCylinder head
Oil cooler
Relief valve
Oil pan
MAINTENANCE SPECIFICATIONS