Filter
Top Products
8 - 29
CHAS
STEERING SYSTEM
REMOVING THE REAR BRAKE SWITCH
1.Remove:
●
Rear brake switch 1
N
OTE:
Push the fastener when removing the rear
brake switch out of the rear brake lever holder.
CHECKING THE HANDLEBAR
1.Check:
●
Handlebar
Bends/cracks/damage → Replace.
WARNING
Do not attempt to straighten a bent
handlebar as this may dangerously weaken
the handlebar.
INSTALLING THE HANDLEBAR
1.Install:
●
Handlebar
●
Handlebar holders
N
OTE:
The upper handlebar holder should be
installed with the punched mark 1 forward 2.
CAUTION:
First tighten the bolts
3
on the front side of
the handlebar holder, and then tighten the
bolts
4
on the rear side.
T
R
.
.
23 Nm (2.3 m • kg, 17 ft • lb)
INSTALLING THE REAR BRAKE LEVER
1.Install:
●
Handlebar switch 1
●
Rear brake lever
●
Lever bracket 2
N
OTE:
Install the lever bracket as shown.
a
80 mm (3.1 in)