Yamaha 5TE-F8197-10 Camper User Manual


 
3 - 12
CHK
ADJ
ADJUSTING THE VALVE CLEARANCE
8.Adjust:
Valve clearance
*****************************************************
Adjustment steps:
Loosen the locknut 1.
Insert a feeler gauge 2 between the adjuster
end and the valve end.
Turn the adjuster 3 clockwise or
counterclockwise with the valve adjusting
tool 4 until the proper clearance is obtained.
Hold the adjuster to prevent it from moving,
and then tighten the locknut.
Measure the valve clearance.
If the clearance is incorrect, repeat the above
steps until the proper clearance is obtained.
*****************************************************
Tappet adjusting tool:
P/N. YM-08035, 90890-01311
T
R
.
.
Locknut:
20 Nm (2.0 m • kg, 14 ft • lb)
9.Install:
All removed parts
N
OTE:
Install all removed parts in the reverse order of
their disassembly. Note the following points.
10.Install:
Recoil starter
Spark plug
Tappet covers
N
OTE:
Install the tappet covers with the ridge facing
up È.
LT
T
R
.
.
10 Nm (1.0 m kg, 7.2 ft lb)
T
R
.
.
18 Nm (1.8 m kg, 13 ft lb)
T
R
.
.
10 Nm (1.0 m kg, 7.2 ft lb)