Filter
Top Products
2 - 7
SPEC
Tilt limit IN 2.5°/1.6 mm
(2.5°/0.06 in)
EX 2.5°/1.6 mm
(2.5°/0.06 in)
Direction of winding
(top view) IN Clockwise ----
EX Clockwise ----
Piston:
Piston to cylinder clearance 0.040 ~ 0.065 mm
(0.0016 ~ 0.0026 in)
0.150 mm
(0.0059 in)
Piston size “D” 84.445 ~ 84.460 mm
(3.3246 ~ 3.3252 in)
----
Measuring point “H” 5 mm (0.20 in) ----
Piston offset 0.5 mm (0.0200 in) ----
Offset direction Intake side ----
Piston pin bore inside diameter 20.004 ~ 20.015 mm
(0.7876 ~ 0.7880 in)
20.045 mm
(0.7892 in)
Piston pin outside diameter 19.991 ~ 20.000 mm
(0.7870 ~ 0.7874 in)
19.971 mm
(0.7863 in)
Piston rings:
Top ring
Type Barrel ----
Dimensions (B × T) 1.2 × 3.1 mm
(0.04724 × 0.1220 in)
----
End gap (installed) 0.20 ~ 0.40 mm
(0.0079 ~ 0.0157 in)
0.65 mm
(0.0256 in)
Side clearance (installed) 0.03 ~ 0.08 mm
(0.0012 ~ 0.0031 in)
0.13 mm
(0.0051 in)
Item Standard Limit
*
H
D
T
B
MAINTENANCE SPECIFICATIONS