Filter
Top Products
3 - 17
CHK
ADJ
ADJUSTING THE SPEED LIMITER/
ADJUSTING THE STARTER CABLE
2.Adjust:
●
Speed limiter length
*****************************************************
Speed limiter length adjustment steps:
●
Loosen the locknut 1.
●
Turn the adjuster 2 in or out until the
specified speed limiter length is obtained.
●
Tighten the locknut.
WARNING
●
Particularly for a beginner rider, the
speed limiter should be screwed in
completely. Screw it out little by little as
their riding technique improves. Never
remove the speed limiter for a beginning
rider.
●
For proper throttle lever operation do not
turn out the adjuster more than 12 mm
(0.47 in). Also, always adjust the throttle
lever free play to 3 ~ 5 mm (0.12 ~ 0.20 in).
*****************************************************
Turning in
Speed limiter length is
decreased.
Turning out
Speed limiter length is
increased.
ADJUSTING THE STARTER CABLE
1.Remove:
●
Seat
●
Fuel tank side panel (left)
Refer to “SEAT, CARRIERS, FENDERS
AND FUEL TANK”.