Filter
Top Products
– 71 –
ENG
TRANSMISSION
INSTALLING THE TRANSMISSION
1.Install:
●
Shift shaft 1
●
Drive axle assembly 2
●
Clutch dog 3
●
Shift fork 4
●
Guide bar 5
N
OTE:
Install the shift fork with the “L” mark facing
towards the left side of the crankcase. Be sure
that the shift fork guide pin is properly seated
in the shift shaft groove.
2.Check:
●
Shift operation
Unsmooth operation → Repair.
N
OTE:
●
Oil each gear and bearing thoroughly.
●
Before assembling the crankcase, be sure
that the transmission is in neutral and that
the gears turn freely.