Filter
Top Products
4 - 15
ENG
CYLINDER HEAD
4.Tighten:
●
Camshaft sprocket bolt 1
N
OTE:
Use the rotor holding tool 2 to hold the starter
pulley.
5.Check:
●
Camshaft sprocket “I” mark
●
Rotor “T” mark
Out of alignment → Adjust.
Rotor holding tool:
P/N. YU-01235, 90890-01235
T
R
.
.
60 Nm (6.0 m • kg, 43 ft • lb)