Yamaha 5TE-F8197-10 Camper User Manual


 
4 - 48
ENG
PRIMARY AND SECONDARY SHEAVES
ASSEMBLING THE PRIMARY SHEAVE
1.Clean:
Primary sliding sheave face 1
Primary fixed sheave face 2
Collar 3
Weights 4
Primary pulley cam face
N
OTE:
Remove any excess grease.
2.Install:
Weights 1
N
OTE:
Apply Yamaha Grizzly grease (120 g) to the
whole outer surface of the weights and
install.
Apply Yamaha Grizzly grease to the inner
surface of the collar.
Apply Yamaha Grizzly grease to the inner
surface of the primary sliding sheave.
3.Install:
Spacer
Sliders 1
Primary pulley cam 2
Primary sliding sheave cap
T
R
.
.
3 Nm (0.3 m kg, 2.2 ft lb)
ASSEMBLING THE SECONDARY SHEAVE
1.Apply:
BEL-RAY assembly lube
®
(to the secondary sliding sheave 1 inner
surface and oil seals)
BEL-RAY assembly lube
®
(to the bearings, oil seals and inner surface
of the secondary fixed sheave 2)
2.Install:
Guide pins 1