Filter
Top Products
4 - 38
ENG
RECOIL STARTER AND A.C. MAGNETO
CHECKING THE STARTER CLUTCH
1.Check:
●
Starter one-way clutch 1
Cracks/damage → Replace.
●
Bolts 2 (starter clutch)
Loose → Replace with a new one, and clinch
the end of the bolt.
N
OTE:
The arrow mark on the starter clutch must face
inward, away from the rotor.
*****************************************************
Checking steps:
●
Install the starter wheel gear to the starter
clutch, and hold the starter clutch.
●
When turning the starter wheel gear
counterclockwise È, the starter clutch and
the wheel gear should be engaged.
If not, the starter clutch is faulty. Replace it.
●
When turning the starter wheel gear
clockwise É, the starter wheel gear should
turn freely.
If not, the starter clutch is faulty. Replace it.
*****************************************************
T
R
.
.
Bolts (starter clutch):
30 Nm (3.0 m • kg, 22 ft • lb)
LOCTITE
®
2.Check:
●
Gear teeth (starter idle) 1
●
Gear teeth (starter wheel) 2
Burrs/chips/roughness/wear → Replace.
3.Check:
●
Starter wheel gear
(contacting surface)
Damage/pitting/wear → Replace.