Filter
Top Products
3 - 45
CHK
ADJ
CHANGING THE FINAL GEAR OIL
CHANGING THE FINAL GEAR OIL
1.Place the machine on a level surface.
2.Remove:
●
Final gear case protector 1
3.Place a receptacle under the final gear case.
4.Remove:
●
Oil filler bolt
●
Drain plug 1
5.Drain:
●
Final gear oil
6.Install:
●
Drain plug
N
OTE:
Check the drain plug gasket. If it is damaged,
replace it with a new one.
7.Fill:
●
Final gear case
CAUTION:
Take care not to allow foreign material to
enter the final gear case.
8.Check:
●
Oil level
Refer to “CHECKING THE FINAL GEAR OIL
LEVEL”.
9.Install:
●
Oil filler bolt
●
Final gear case protector
Periodic oil change:
0.23 L (0.20 Imp qt, 0.24 US qt)
Total amount:
0.25 L (0.22 Imp qt, 0.26 US qt)
Recommended oil:
SAE 80 API “GL-4” Hypoid gear
oil
T
R
.
.
23 Nm (2.3 m • kg, 17 ft • lb)
T
R
.
.
23 Nm (2.3 m • kg, 17 ft • lb)
T
R
.
.
16 Nm (1.6 m • kg, 11 ft • lb)