Filter
Top Products
8 - 3
CHAS
FRONT AND REAR WHEELS
CHECKING THE WHEELS
1.Check:
●
Wheel
2.Measure:
●
Wheel runout
Over the specified limit → Replace the wheel
or check the wheel bearing plays 1.
3.Check:
●
Wheel balance
Out of balance → Adjust.
Wheel runout limit:
Radial
2
: 2.0 mm (0.08 in)
Lateral
3
: 2.0 mm (0.08 in)
WARNING
After replacing the tire, ride conservatively
to allow the tire to be properly seated in the
rim. Failure to do so may cause an accident
resulting in machine damage and possible
operator injury.
CHECKING THE WHEEL HUBS
1.Check:
●
Wheel hub 1
Cracks/damage → Replace.
●
Splines (wheel hub) 2
Wear/damage → Replace.