Filter
Top Products
9 - 50
– +
ELEC
2WD/4WD SELECTING SYSTEM
C0NTINUITY
CORRECT
4.On-command four-wheel drive switch
Refer to “CHECKING THE SWITCHES”.
*
INCORRECT
Replace the on-command four-wheel drive
switch.
CORRECT
5.Gear motor
●
Check that the shift fork sliding gear is in
the 2WD position.
●
Disconnect the gear motor coupler.
●
Remove the gear motor from the differen-
tial gear case.
●
Connect the battery (12 V) to the gear
motor terminals.
2WD
→
4WD:
Battery (+) terminal
→
Brown/White terminal
1
Battery (–) terminal
→
Sky blue terminal
2
4WD
→
2WD:
Battery (+) terminal
→
Sky blue terminal
2
Battery (–) terminal
→
Blue/Black terminal
3
●
Make sure that the drive gear (shift fork
sliding gear) operates correctly.
N
OTE:
When installing the differential gear case in
the gear motor, refer to “FRONT CONSTANT
VELOCITY JOINTS AND DIFFERENTIAL
GEAR” in CHAPTER 7.
*
INCORRECT
Replace the gear motor.