Filter
Top Products
9 - 40
– +
ELEC
SIGNAL SYSTEM
C0NTINUITY
GOOD
CONDITION
WARNING
Handle the thermo switch (cylinder head)
with special care.
Never subject it to a strong shock or allow
it to be dropped. Should it be dropped, it
must be replaced.
T
R
.
.
Thermo switch (cylinder head):
8 Nm (0.8 m • kg, 5.8 ft • lb)
Three bond sealock
®
#10
*
BAD CONDITION
Replace the thermo switch (cylinder head).
3.Voltage
●
Connect the pocket tester (DC 20 V) to the
bulb socket connector.
Tester (+) lead
→
Red/Black terminal
1
Tester (–) lead
→
White/Blue terminal
2
MEETS
SPECIFICATION
●
Turn the main switch to “ON”.
●
Check the voltage (12 V).
*
OUT OF SPECIFICATION
The wiring circuit from the main switch to the
bulb socket connector is faulty, repair it.