Yamaha 5TE-F8197-10 Camper User Manual


 
4 - 62
ENG
CRANKCASE
CHECKING THE CRANKCASE
1.Thoroughly wash the case halves in a mild
solvent.
2.Clean all the gasket mating surfaces and
crankcase mating surfaces thoroughly.
3.Check:
Crankcase
Cracks/damage Replace.
Oil delivery passages
Clogged Blow out with compressed air.
CHECKING THE BEARINGS
1.Check:
Bearings
Clean and lubricate, then rotate the inner
race with a finger.
Roughness Replace.
ASSEMBLING THE CRANKCASE
1.Apply:
Sealant (Quick Gasket
®
) 1
(to the mating surfaces of both case halves)
2.Install:
Dowel pins 2
Sealant (Quick Gasket
®
):
P/N. ACC-11001-05-01
Yamaha bond No. 1215:
P/N. 90890-85505
3.Fit the left crankcase onto the right case. Tap
lightly on the case with a soft hammer.
CAUTION:
Before installing and torquing the
crankcase holding bolts, be sure to check
whether the transmission is functioning
properly by manually rotating the shift cam
in both directions.