Yamaha 5TE-F8197-10 Camper User Manual


 
4 - 46
ENG
PRIMARY AND SECONDARY SHEAVES
REMOVING THE PRIMARY AND
SECONDARY SHEAVES
1.Loosen:
Nut (secondary sheave) 1
Nut (primary sheave) 2
N
OTE:
Use the sheave holder 3 to hold the primary
sheave.
First, loosen the nut (secondary sheave) 2,
then loosen the nut (primary sheave) 1.
Sheave holder:
P/N. YS-01880-A, 90890-01701
DISASSEMBLING THE SECONDARY
SHEAVE
1.Remove:
Nut 1
*****************************************************
Removing steps:
Attach the sheave fixed block 2, locknut
wrench 3 and sheave spring compressor 4
to the secondary sheave assembly.
Place the sheave fixed block in a vise and
secure it.
Tighten the sheave spring compressor nut 5
and compress the spring.
Loosen the nut 1 with the locknut wrench 3.
Remove the nut 1.
Remove the sheave spring compressor and
locknut wrench.
*****************************************************
Sheave fixed block:
P/N. YM-04135, 90890-04135
Locknut wrench:
P/N. YM-01348, 90890-01348
Sheave spring compressor:
P/N. YM-04134, 90890-04134