Filter
Top Products
9 - 38
– +
ELEC
SIGNAL SYSTEM
3.If the reverse indicator light fails to come on:
CONTINUITY
1.Bulb and bulb socket
●
Check the bulb and bulb socket for
continuity.
NO CONTINUITY
Replace the bulb and/or bulb socket.
CONTINUITY
2.Reverse switch
Refer to “CHECKING THE SWITCHES”.
NO CONTINUITY
Replace the reverse switch.
3.Voltage
●
Connect the pocket tester (DC 20 V) to the
bulb socket coupler.
Tester (+) lead
→
Red/White terminal
1
Tester (–) lead
→
Green/Blue terminal
2
MEETS
SPECIFICATION
●
Turn the main switch to “ON”.
●
Check the voltage (12 V).
Replace the CDI unit.
OUT OF SPECIFICATION
The wiring circuit from the main switch to the
bulb socket connector is faulty, repair it.