2 - 10
SPEC
Cooling system:
Radiator core
Width 300 mm (11.8 in) ----
Height 208 mm (8.19 in) ----
Thickness 26 mm (1.02 in) ----
Radiator cap opening pressure 93.7 ~ 122.6 kPa (0.937 ~
1.226 kg/cm
2
, 13.32 ~ 17.43 psi)
----
Radiator capacity 0.70 L (0.62 Imp qt, 0.74 US qt) ----
Coolant reservoir
Capacity 0.39 L (0.34 Imp qt, 0.41 US qt) ----
From low to full level 0.15 L (0.13 Imp qt, 0.16 US qt) ----
Water pump:
Type Single-suction centrifugal pump ----
Reduction ratio 38/32 (1.188)
Thermostat:
Valve opening temperature 63.5 ~ 66.5 °C (146.3 ~ 151.7 °F) ----
Valve full open temperature 80 °C (176 °F) ----
Valve lift-full open 3 mm (0.12 in) ----
Shaft drive:
Middle gear backlash 0.1 ~ 0.3 mm (0.004 ~ 0.012 in) ----
Final gear backlash 0.1 ~ 0.2 mm (0.004 ~ 0.008 in) ----
Differential gear backlash 0.10 ~ 0.50 mm
(0.004 ~ 0.020 in)
----
Lubrication chart:
Item Standard Limit
Oil Strainer
Timing Chain Area
Transmission
Rocker Arm
Oil Pump
Piston Pin
Piston
Crank Pin
Camshaft
Oil Filter
Bypass
Valve
Clutch
Valve
Pressure feed
Splashed scavenge
MAINTENANCE SPECIFICATIONS