Filter
Top Products
– 2 –
SPEC
SPECIFICATIONS
GENERAL SPECIFICATIONS
Item Standard
Model code: 5UH1
Dimensions:
Overall length 1,984 mm (78.1 in)
Overall width 1,085 mm (42.7 in)
Overall height 1,120 mm (44.1 in)
Seat height 827 mm (32.6 in)
Wheelbase 1,233 mm (48.5 in)
Minimum ground clearance 245 mm (9.7 in)
Minimum turning radius 3,000 mm (118.1 in)
Basic weight:
With oil and full fuel tank 258 kg (569 lb)
Engine:
Engine type Air-cooled 4-stroke, SOHC
Cylinder arrangement Forward-inclined single cylinder
Displacement 348 cm
3
Bore × stroke 83.0 × 64.5 mm (3.27 × 2.54 in)
Compression ratio 9.2 : 1
Standard compression pressure (at sea level) 1,050 kPa (10.5 kg/cm
2
, 149.3 psi) at 750 r/min
Starting system Electric and recoil starter
Lubrication system: Wet sump
Oil type or grade:
Engine oil
API service SE, SF, SG type or higher
Final gear oil SAE 80API “GL-4” Hypoid Gear Oil
Differential gear oil SAE 80API “GL-4” Hypoid Gear Oil
Oil capacity:
Engine oil
Periodic oil change 2.2 L (1.94 Imp qt, 2.33 US qt)
With oil filter replacement 2.3 L (2.02 Imp qt, 2.43 US qt)
Total amount 3.1 L (2.73 Imp qt, 3.28 US qt)
Final gear case oil
Periodic oil change 0.23 L (0.20 Imp qt, 0.24 US qt)
Total amount 0.25 L (0.22 Imp qt, 0.26 US qt)
0° 10° 30° 50° 70° 90° 110°
-20° -10° 0° 10° 20° 30° 40°
130°F
50°C
YAMALUBE 4 (20W40) or SAE 20W40
YAMALUBE 4 (10W30) or SAE 10W30
SAE 5W30
GENERAL SPECIFICATIONS