Filter
Top Products
3 - 44
CHK
ADJ
ADJUSTING THE REAR BRAKE LIGHT SWITCH/
CHECKING THE FINAL GEAR OIL LEVEL
2.Adjust:
●
Rear brake light switch operation timing
***********************************************
●
Hold the main body 1 of the rear brake light
switch so that it does not rotate and turn the
adjusting nut 2 in direction a or b until the
rear brake light comes on at the proper time.
***********************************************
Direction
a
Brake light comes on
sooner.
Direction
b
Brake light comes on
later.
CHECKING THE FINAL GEAR OIL LEVEL
1.Place the machine on a level place.
2.Remove:
●
Oil filler bolt 1
3.Check:
●
Oil level
Oil level should be up to the brim of the hole.
Oil level low → Add oil to the proper level.
CAUTION:
Take care not allow foreign material to
enter the final gear case.
Recommended oil:
SAE 80 API “GL-4” Hypoid gear
oil
4.Install:
●
Oil filler bolt
T
R
.
.
23 Nm (2.3 m • kg, 17 ft • lb)