Filter
Top Products
5 - 6
COOL
THERMOSTAT
CHECKING THE THERMOSTAT
1.Check:
●
Thermostat 1
Does not open at 63.5 ~ 66.5 °C (146.3 ~
151.7 °F) → Replace.
*****************************************************
Checking steps:
●
Suspend the thermostat in a container filled
with water.
●
Slowly heat the water.
●
Place a thermometer in the water.
●
While stirring the water, observe the
thermostat and thermometer’s indicated
temperature.
*****************************************************
1
Thermostat
2
Thermometer
3
Water
4
Container
È
Fully closed
É
Fully open
N
OTE:
If the accuracy of the thermostat is in doubt,
replace it. A faulty thermostat could cause
serious overheating or overcooling.
2.Check:
●
Thermostat cover
Cracks/damage → Replace.
INSTALLING THE THERMOSTAT
1.Install:
●
Thermostat 1
●
Thermostat cover
N
OTE:
Install the thermostat with its breather hole
a
toward the projection
b
.
2.Fill:
●
Cooling system
(with the specified amount of the
recommended coolant)
Refer to “CHANGING THE COOLANT” in
CHAPTER 3.
3.Check:
●
Cooling system
Leak → Repair or replace any faulty part.