Filter
Top Products
3 - 19
CHK
ADJ
CHECKING THE SPARK PLUG
CHECKING THE SPARK PLUG
1.Remove:
●
Seat
●
Fuel tank side panel (right)
Refer to “SEAT, CARRIERS, FENDERS
AND FUEL TANK”.
2.Remove:
●
Spark plug
3.Check:
●
Spark plug type
Incorrect → Replace.
Standard spark plug:
DR8EA/NGK
4.Check:
●
Electrode 1
Wear/damage → Replace.
●
Insulator 2
Abnormal color → Replace.
Normal color is a medium-to-light tan color.
5.Clean the spark plug with a spark plug
cleaner or wire brush.
6.Measure:
●
Plug gap a
Use a wire gauge or feeler gauge.
Out of specification → Regap.
7.Tighten:
●
Spark plug
N
OTE:
Before installing a spark plug, clean the gasket
surface and plug surface.
8.Install:
●
Fuel tank side panel (right)
●
Seat
Refer to “SEAT, CARRIERS, FENDERS
AND FUEL TANK”.
Spark plug gap:
0.6 ~ 0.7 mm (0.024 ~ 0.028 in)
T
R
.
.
18 Nm (1.8 m • kg, 13 ft • lb)