Filter
Top Products
4 - 69
ENG
CRANKSHAFT AND OIL PUMP
INSTALLING THE CRANKSHAFT AND
BALANCER
1.Install:
●
Crankshaft
N
OTE:
Hold the connecting rod at the Top Dead
Center (T.D.C.) with one hand while turning
the nut of the installing tool with the other.
Operate the installing tool until the crankshaft
bottoms against the bearing.
CAUTION:
Apply engine oil to each bearing to protect
the crankshaft against scratches and to
make installation easier.
Crankshaft installer set
12
:
P/N. YU-90050
Buffer boss installer set
23
:
P/N. 90890-04088
Crankshaft installer bolt
1
:
P/N. 90890-01275
Adapter #11
3
:
P/N. YM-33279
Spacer (crankshaft):
P/N. YM-90070-A, 90890-04060
2.Install:
●
Crankshaft seal
N
OTE:
Install the crankshaft seals in the correct place
and in the correct direction.
3.Install:
●
Balancer 1
N
OTE:
Align the punch marks a on the drive and
driven gears.