Filter
Top Products
4 - 87
ENG
MIDDLE GEAR
●
Attach the gear lash measurement tool 3
and dial gauge 4.
a
Measuring point is 8.12 mm (0.32 in)
●
Measure the gear lash while rotating the
middle driven shaft back and forth.
N
OTE:
Measure the gear lash at 4 positions. Rotate
the middle driven gear 90° each time.
●
If the gear lash is incorrect, adjust the gear
lash with middle driven pinion gear shims
and/or middle drive pinion gear shims.
*****************************************************
Gear lash measurement tool:
P/N. YM-01467, 90890-01467