Filter
Top Products
– 58 –
ENG
PRIMARY AND SECONDARY SHEAVES
ASSEMBLING THE PRIMARY SHEAVE
1.Clean:
●
Primary sliding sheave face 1
●
Primary fixed sheave face 2
●
Collar 3
●
Weights 4
●
Primary pulley cam face
N
OTE:
Remove any excess grease.
2.Install:
●
Weights 1
N
OTE:
●
Apply Yamaha Grizzly grease (90 g) to the
whole outer surface of the weights and
install.
●
Apply Yamaha Grizzly grease to the inner
surface of the collar.
●
Apply Yamaha Grizzly grease to the inner
surface of the primary sliding sheave.
3.Install:
●
Spacer
●
Sliders 1
●
Primary pulley cam 2
●
Primary sliding sheave cap
T
R
.
.
3 Nm (0.3 m • kg, 2.2 ft • lb)
ASSEMBLING THE SECONDARY SHEAVE
1.Apply:
●
BEL-RAY assembly lube
®
(to the secondary sliding sheave 1 inner
surface and oil seals)
1
2.Install:
●
Secondary sliding sheave 1
●
Secondary fixed sheave 2
N
OTE:
Align the alignment mark a on the secondary
sliding sheave with the hole b in the guide pin
that is aligned with the rivet c on the
secondary fixed sheave.