Filter
Top Products
BRAKES
6.15
to stop machine. Repeat this procedure 10 times,
allowing brakes to cool sufficiently after each
run.
REAR CAL IPER REMOVAL
1. Clean caliper area before removal.
2. Using a flare nut wrench, remove the brake lines
(A). Place a container to catch brake fluid
draining from brake lines.
A
3. Remove the caliper mounting bolts and remove
the caliper assembly (B) from the caliper mount.
B
FRONT / REAR CAL IPER
DISASSEMBL
Y
A
1. Remove the c--clips (A) from the caliper sliding
bolts.
2. Remove the caliper slide bolts (B), mounting
bracket (C), and brake pads (D).
B
C
D
A
Enfocus Software - Customer Support