Filter
Top Products
BODY / STEERING / SUSPENSION
5.9
Press
Driver
Ball Joint
Ill. 3
Thedrivermustfittheinside
diameter of the A--arm end.
Driver Placement
Correct
Ball Joint Installation
5. Place the A--arm in the correct position for ball
joint installation. Face the A--arm end flat on top
of the driver. Carefully drive the ball joint into
place until the ball joint is properly installed.
Press
Driver
Ball Joint
Press
Driver
Ball Joint
6. After the new ball joint is installed into the A--arm,
install a NEW retaining ring. Upon A--arm
installation onto the steering knuckle, install a
NEW cotter key also.
Ball Joint
Retaining Ring
A--arm
Nut & Washer
NEW Cotter Key
NEW
Enfocus Software - Customer Support