Honeywell KMD 250 GPS Receiver User Manual


 
1-71
Rev 2 Apr/2004 KMD 250 Pilot's Guide
Section 1
Basic Operation
DELETING THE ACTIVE
FLIGHT PLAN
To delete the active flight plan
perform the following steps:
1. Press the FPL Key until the
FLIGHT PLAN INDEX Page is
displayed as shown in Figure
1-136. Note that the active
flight plan is highlighted in
magenta.
2. Press the DELETE Softkey
and Figure 1-137 will be dis-
played to verify the deletion of
the active flight plan.
3. Press the OK Softkey to
delete the active flight plan. As
shown in Figure 1-138, the
active flight plan is no longer
displayed. Note also that the
previously active flight plan has
not been deleted from the list of
stored flight plans.
NOTE: If the active flight plan
has not been stored prior to
deleting, press the COPY
Softkey to store a copy of the
active flight plan before
pressing the DELETE Softkey.
Flight Plan Operation
Figure 1-136
Figure 1-137
Figure 1-138