Honeywell KMD 250 GPS Receiver User Manual


 
SECTION 5
SYSTEM MESSAGES
VIEWING SYSTEM
MESSAGES
A system message is pre-
sented as MESSAGE PRESS
MENU in bold yellow text that
flashes alternating with the
page title at the bottom of the
screen as shown in Figure 5-1.
When the MENU Key is
pressed, the message will be
displayed as in Figure 5-2. In
this case the message is a FIS
Receiver Failure.
Pressing the OK Softkey will
exit the Message Page and the
yellow MESSAGE PRESS
MENU prompt will no longer
be displayed.
To access the system mes-
sage again, perform the fol-
lowing steps:
1. Press the MENU Key to
display the AUX MENU
Softkey as in Figure 5-3.
5-1
Rev 2 Apr/2004 KMD 250 Pilot's Guide
Section 5
System Messages
System Messages
Figure 5-1
Figure 5-2
Figure 5-3
Messages 8/13/07 10:01 AM Page 5-1