Filter
Top Products
1-81
Rev 2 Apr/2004 KMD 250 Pilot's Guide
Section 1
Basic Operation
SYSTEM SETUP
This portion of the manual is
designed to provide step by
step instructions for the setup
of the KMD 250. Note that not
all features discussed here are
available in all installations. If
an item is not available it will
appear “grayed out” and will not
be selectable.
MAP SETUP
1. Press the MENU Key to
display Figure 1-162. Press
the MAP SETUP Softkey to
display Figure 1-163. Use the
Joystick to select the desired
field and turn the Rotary Knob
to make the desired changes.
Pressing the OVLY SETUP
Softkey will go directly to
OVERLAYS GROUP Page for
selection of map overlays as
discussed later in Map Setup.
Orientation: Set either in Track Up, North Up or Heading Up.
Extended TRK: Turns on or off the extended track line, which is drawn
ahead of the present position in the direction of the present track.
Range Rings: Turns range rings on or off on the map.
Airport Settings: Selectable airport filtering for display on the map.
Min Rwy Len: Minimum Runway Length allows the display of airports
on the map based on minimum runway length. This can be set to Any or
1000 ft to 5000 ft in 100 foot increments.
Surface: Allows the display of airports on the map based on Any sur-
face or Hard surface only.
Label: May be set to display the airport on the map with ICAO identifier,
the airport Name or City.
All settings on MAP SETTINGS GROUP 1 affect all map displays for all
functions. Settings on GROUP 2 through 6 affects only the displays for
the currently viewed function.
System Setup
Figure 1-162
Figure 1-163