Filter
Top Products
1-28
KMD 250 Pilot's Guide
Section 1
Basic Operation
Map Operation
Rev 2 Apr2004
type, frequency and ident as
shown in Figure 1-37.
As discussed previously in
Airport Information, pressing
the QUICK TUNE Softkey will
tune the appropriate KX
155A/165A Nav/Comm to the
navaid frequency. If the
system contains only one KX
155A/165A, simply pressing
the QUICK TUNE Softkey will
tune the Nav radio. If multiple
KX 155A/165A systems are
contained in the installation,
pressing the QUICK TUNE
Softkey will display the Nav
selection display as shown in
Figure 1-38. Use the Joystick
or Rotary Knob to select the
desired Nav or Comm for
tuning. Press the OK Softkey
to tune the radio.
AIRSPACE
INTERROGATION
In order to interrogate a piece
of airspace on the Map display,
move the joystick pointer to
one of the airspace boundaries
to display an information
window as shown in Figure 1-
39.
IMPORTANT:
When a single airspace
boundary line is shared by
two different pieces of air-
space (which is very common), the airspace with the lower vertical
limit will always be highlighted.
Once it is determined the piece of airspace highlighted is the piece for
which information is wanted (you may have to zoom out to verify this, but
beware, some airspace switches off as you zoom out dependent on the
settings made in Map Setup), press the MORE INFO Softkey and addi-
tional information will be displayed as in Figure 1-40.
Figure 1-37
Figure 1-38
Figure 1-39