Filter
Top Products
2-58
Section 2
FIS Operation
Rev 4 Aug/2007
KMD 250 Pilot's Guide
To Enter Location Name:
The following example shows
entering MONTROSE REGL
as a location.
1. Turn the Rotary Knob to dis-
play the USER DEFINED
AREA ENTRY window as
shown in Figure 2-63.
2. Move the Joystick down to
highlight the first character of
the location name as shown in
Figure 2-65.
3. Turn the Rotary Knob coun-
terclockwise until an M is
selected as shown in Figure 2-
66.
4. Move the Joystick to the
right to highlight the next char-
acter as seen in Figure 2-67.
5. Turn Rotary Knob clockwise
until an O is selected. Continue
moving the cursor and entering
characters until MONTROSE is
displayed.
Normal Operation
Figure 2-65
Figure 2-66
Figure 2-67
KMD 250 FIS_R4 8/13/07 10:07 AM Page 2-58