Filter
Top Products
1-83
Rev 2 Apr/2004 KMD 250 Pilot's Guide
Section 1
Basic Operation
VFR Map land related icons
are shown with corresponding
definitions.
As before, use the Joystick to
select the desired field and turn
the Rotary Knob to change the
setting.
5. Press the NEXT GROUP
Softkey to display the second
LAND LINE GROUP Page as
in Figure 1-167.
Again, use the Joystick to
select the desired field and turn
the Rotary Knob to change the
setting.
6. Press the NEXT GROUP
or OVLY SETUP Softkey to
display the OVERLAYS
GROUP Page as in Figure 1-
168.
Overlay icons are shown with
corresponding definitions.
NOTE: Some functions may not
be available in certain installations. Unavailable functions will appear
gray with dashes for values and will not be selectable.
If Stormscope, a Traffic Avoidance System and/or Flight Information
Services have been installed, control of how the data is displayed (or not
displayed) on the map is accomplished on this page. The maximum
range settings at which the ICON and TEXT is displayed on the map
may be selected for each function. Use the Joystick to select the desired
field and turn the Rotary Knob to change the setting.
7. Press the DONE Softkey when Map Setup is complete.
System Setup
Figure 1-168
Figure 1-167