Filter
Top Products
1-6
Rev 4 Aug/2007
KMD 250 Pilot's Guide
Section 1
Basic Operation
Icon background will be gray because that function will not be displayed
at that range setting.
If a Status Icon has a light blue (cyan) background the function is cur-
rently being displayed. This does not necessarily mean that data is vis-
ible because there may be nothing to view.
For example, if traffic icons are set to display at 30nm on the Map Setup
Overlays Group Page and the VFR Map range is increased to beyond
30nm, then traffic will no longer be overlayed on the VFR Map display
and the traffic Status Icon background will change from light blue to gray.
The following table illustrates the Function Status Icons and their mean-
ings in more detail.
General Information
Icon Colors Description
Black on cyan Traffic sensor in standby mode being displayed.
Black on cyan Active traffic information being displayed.
Black on gray Traffic sensor in standby mode, not being displayed.
Black on gray Traffic sensor active, not being displayed.
Black on yellow TIS service not available.
Flashing black on
yellow
A Traffic Advisory (TA) alert is active. The icon will be
flashing.
Flashing black on red A Resolution Advisory (RA) alert is active. The icon will
be flashing.
Black on gray with red
slash
Traffic sensor data invalid / not being displayed.
Black on cyan
Stormscope
®
information being received and dis-
played.<MODE> is either STRK (Strike) or CELL
depending on mode selected on Stormscope
®
page.
Yellow on cyan
Stormscope
®
information being received and displayed.
Strikes have occurred within 25 nm.
Black on gray
Stormscope
®
information being received but not dis-
played.
Yellow on gray
Stormscope
®
information being received but not dis-
played. Strikes have occurred within 25 nm.
Black on gray with red
slash
Stormscope
®
information not being received; data is
invalid.