Filter
Top Products
1-10
Rev 4 Aug/2007
KMD 250 Pilot's Guide
Section 1
Basic Operation
General Information
POP-UP HELP DISPLAYS
Pop-up status displays are shown
if a Function Select Key is pressed
and held for longer than 2 seconds.
These can help provide a refer-
ence for monitoring the status of
selected functions. The first
example is a MAP Function Select
Key pop-up. Second is the pop-up
displayed when pressing and
holding the WX Function Select
Key.
POWER DOWN
When power is turned off a display
similar to that shown here will be
seen. The system will shut down
in 5 seconds. This allows for inad-
vertently turning off the system.
Push the ON/OFF/Brightness
Control back in before the count-
down is over and the system will
continue where it left off with no
loss of data.
DATA FIELDS
Data Fields may be used to display various types of information in win-
dows on the left side of the screen, as shown here. This makes it easy
to get quick access to desired information.
The Data Fields can be turned on or off and customized separately in
each of the MAP, WX or TRFC Displays. The system will remember the
last selected parameters in each function display and will maintain this
configuration until changed.
Power Down Display
Weather Display Pop-Up Help
Map Display Pop-Up Help