Filter
Top Products
1-99
Rev 2 Apr/2004 KMD 250 Pilot's Guide
Section 1
Basic Operation
3. Press the SELECT
Softkey to display Figure 1-
192.
4. If necessary, use the
Joystick to highlight Read user
data from another datacard.
5. Press the SELECT
Softkey.
6. When Figure 1-193 is dis-
played, insert the datacard
containing the data to be
copied.
7. After the datacard is
inserted, the data will be read
and Figure 1-194 will displayed
indicating the data is ready to
be copied.
8. Re-insert the original data-
card that will receive the data.
9. Figure 1-195 will be dis-
played indicating data on the
datacard will be overwritten.
10. Press the OK Softkey to
overwrite.
Datacards
Figure 1-192
Figure 1-193
Figure 1-194
Figure 1-195