Filter
Top Products
1-69
Rev 2 Apr/2004 KMD 250 Pilot's Guide
Section 1
Basic Operation
CHANGING THE NAME OF
THE FLIGHT PLAN
The name of the flight plan can
be changed from either the
STORED FLIGHT PLAN or
ACTIVE FLIGHT PLAN Pages
while in FPL Map View or FPL
Data View.
To change the name of the
flight plan, perform the fol-
lowing steps.
1. Use the Joystick to select
the flight plan name as shown
in Figure 1-130.
2. Turn the Rotary Knob one
increment and the flight plan
name will shift to the left with
the first character highlighted
as in Figure 1-131.
3. Use the Rotary Knob to
enter the desired first character
for the new waypoint name.
4. Use the Joystick to select
the next character field.
5. Use the Rotary Knob to
enter the next desired char-
acter for the new waypoint
name. Continue until the
desired name is entered as
seen in Figure 1-132.
Pressing the DEFAULT NAME
Softkey will cause the flight plan name to revert back to name previously
given by KMD 250. Pressing the CLEAR NAME Softkey will delete all
characters in the flight plan name field allowing different characters to be
entered.
Flight Plan Operation
Figure 1-130
Figure 1-131
Figure 1-132