Honeywell KMD 250 GPS Receiver User Manual


 
1-88
Rev 2 Apr/2004
KMD 250 Pilot's Guide
Section 1
Basic Operation
DEMO MODE FOR GPS
VERSIONS
If the KMD 250 contains the
optional internal GPS, way-
points and flight plans may be
created, stored and navigated
in the Demo Mode. After
entering Demo Mode refer to
previous discussions for opera-
tion of the KMD 250.
CHANGING DEMO MODE
SETTINGS
To modify the Demo Mode set-
tings, perform the following
steps:
1. Press the MENU Key to dis-
play the AUX MENU Softkey
as in Figure 1-176.
2. Press the AUX MENU
Softkey to display Figure 1-
177. If necessary, use the
Joystick to highlight Demo
Mode Setup as shown.
3. Press the SELECT Softkey
to display Figure 1-178. In ver-
sions without the optional
internal GPS, the default Mode
setting is Auto. When Auto is
selected, all other parameters
will be “grayed out”. To change
the other parameters, turn the
Rotary Knob to select Manual
in the Mode field. The Joystick
may now be used to select the
desired field. Turn the Rotary Knob to enter the desired values.
In versions containing the optional internal GPS, Mode is not available
and all fields are selectable and editable.
4. When finished making changes, press the RESTART DEMO Softkey
to begin the demo using the new parameters.
System Setup
Figure 1-176
Figure 1-177
Figure 1-178