Filter
Top Products
2 - 23
SPEC
TIGHTENING TORQUES
CHASSIS TIGHTENING TORQUES
Part to be tightened
Thread
size
Tightening
torque
Remarks
Nm m·kgf
Engine mounting:
Rear lower mounting bolt M10 45 4.5
Spacer bolt M16 18 1.8
Rear upper mounting bolt and nut M10 45 4.5
Front mounting bolt M12 55 5.5
Pinch bolt M8 24 2.4
Bolt (engine bracket 1 and frame) M10 32 3.2
Bolt (engine bracket 1 and engine) M8 16 1.6
Bolt (engine bracket 2 and engine) M10 36 3.6
Bolt (engine bracket 2 and frame) M8 16 1.6
Front wheel axle M18 72 7.2
Front wheel axle pinch bolt M8 23 2.3
Brake disc and wheel M6 18 1.8
LT
Front brake caliper M10 40 4.0
Front brake hose holder and front fork M6 7 0.7
Brake caliper bleed screw M8 6 0.6
Rear wheel axle nut M18 125 12.5
Rear wheel axle pinch bolt M8 16 1.6
Brake torque rod M8 16 1.6
Rear brake caliper retaining bolt M10 26 2.6
Brake hose union bolt M10 30 3.0
Front brake master cylinder M6 10 1.0
Right rider footrest bracket and frame M8 28 2.8
Rear master cylinder and right rider footrest bracket M8 18 1.8
Rear brake hose holder and brake torque rod M6 10 1.0
Clutch master cylinder M6 10 1.0
Clutch hose union bolt M10 30 3.0
Clutch release cylinder M6 10 1.0
Clutch release cylinder bleed screw M8 6 0.6
Front fender M6 6 0.6
Upper bracket pinch bolt M8 30 3.0
Lower bracket pinch bolt M8 23 2.3
Front fork cap bolt and inner tube M45 25 2.5
Front fork cap bolt and nut M10 25 2.5
Front fork damper rod assembly bolt M10 35 3.5
LT
Handlebar and upper bracket M6 23 2.3
Grip end M6 4 0.4
Steering stem nut M28 115 11.5
Lower ring nut (steering stem) M30 18 1.8 See NOTE.