Filter
Top Products
1 - 38
GEN
INFO
EAS00027
SPECIAL TOOLS
The following special tools are necessary for complete and accurate tune-up and assembly. Use
only the appropriate special tools as this will help prevent damage caused by the use of inappropri-
ate tools or improvised techniques. Special tools, part numbers or both may differ depending on the
country.
When placing an order, refer to the list provided below to avoid any mistakes.
Tool No. Tool name/Function Illustration
Bolt
90890-01083
Weight
90890-01084
Slide hammer bolt
Weight
These tools are needed to remove the
main axle assembly.
90890-01229
Coupling gear/middle shaft tool
This tool is needed when removing or
installing the coupling gear nut.
90890-01230
Final gear backlash band
This tool is needed when measuring the
final gear backlash.
90890-01235
Rotor holding tool
This tool is needed to hold the camshaft
sprocket when loosen or tighten the
camshaft sprocket bolts.
90890-01304
Piston pin puller set
This tool is used to remove the piston
pin.
Tester
90890-01325
Adapter
90890-01352
Radiator cap tester
Radiator cap tester adapter
This tester and its adapter are needed
for checking the cooling system.
Puller
90890-01362
Flywheel puller
This tool is needed to remove the rotor.
SPECIAL TOOLS