Filter
Top Products
4 - 37
CHAS
FRONT AND REAR BRAKES
EAS00625
DISASSEMBLING THE FRONT BRAKE
CALIPERS
The following procedure applies to both of the
brake calipers.
NOTE:
@
Before disassembling either brake caliper,
drain the brake fluid from the entire brake sys-
tem.
1. Remove:
• union bolt
1
• copper washers
2
• brake hose
3
NOTE:
@
Put the end of the brake hose into a container
and pump out the brake fluid carefully.
2. Remove:
• brake caliper pistons
1
• brake caliper piston seals
2
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Secure the right side brake caliper pistons
with a piece of wood
a
.
b. Blow compressed air into the brake hose
joint opening
b
to force out the left side pis-
tons from the brake caliper.
WARNING
@
• Never try to pry out the brake caliper pis-
tons.
• Do not loosen the bolts
3
.
c. Remove the brake caliper piston seals.
d. Repeat the previous steps to force out the
right side pistons from the brake caliper.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲