Filter
Top Products
3 - 26
CHK
ADJ
b. To switch to the “CO” adjusting mode
1) Push the “SELECT” button to switch the
display between the “CO” adjusting
mode and the “DIAG” mode.
2) Push the “SELECT” button and “RESET”
button together for more than two sec-
onds to set the desired mode.
c. To select the cylinder to be adjusted
• Push the “SELECT” button or the “RESET”
button to select the cylinder.
NOTE:
The number of the cylinder to be adjusted will
be indicated on the display.
• Push the “RESET” button to scroll down the
cylinder numbers.
• Push the “SELECT” button to scroll up the
cylinder numbers.
• Push the “SELECT” button and the
“RESET” button together for more than two
seconds to set the cylinder.
d. To adjust the carbon monoxide exhaust gas
volume
• After selecting the cylinder, adjust the
exhaust gas volume by pushing the
“SELECT” button or the “RESET” button.
NOTE:
The exhaust gas volume will be indicated on
the display.
• Push the “RESET” button to increase the
volume.
• Push the “SELECT” button to decrease the
volume.
• Release the button to set the volume.
• Push the “SELECT” button and the
“RESET” button together to return to the
selected cylinder.
e. To deactivate the mode set the main switch
“OFF”.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
ADJUSTING THE EXHAUST GAS VOLUME