Filter
Top Products
4 - 112
CHAS
SHAFT DRIVE
EAS00727
CHECKING THE DRIVE SHAFT
1. Check:
• drive shaft splines
Damage/wear
→
Replace the drive shaft.
EAS00728
INSTALLING THE UNIVERSAL JOINT AND
FINAL DRIVE ASSEMBLY
1. Lubricate:
• universal joint splines
• drive shaft splines
2. Install:
• universal joint
• final drive assembly
NOTE:
Align the drive shaft splines with the driven
yoke of the universal joint.
3. Tighten:
• final drive assembly nuts
Recommended lubricant
Lithium soap base grease
T
R
.
.
42 Nm (4.2 m · kg)
4. Install:
• shift arm
1
NOTE:
Align the punch mark
a
in the shift shaft with
the slot in the shift arm.
5. Install:
• rear wheel
Refer to “REAR WHEEL AND BRAKE
DISC”.
6. Fill:
• final drive assembly
Refer to “CHECKING THE FINAL DRIVE
OIL LEVEL” in chapter 3.
7. Check:
• shift pedal position
Refer to “ADJUSTING THE SHIFT PEDAL”
in chapter 3.
T
R
.
.
10 Nm (1.0 m · kg)