3 - 24
CHK
ADJ
CHECKING AND ADJUSTING THE EXHAUST GAS AT
IDLE
3. Install:
• pocket tester 1
(onto the engine oil drain bolt)
• engine tachometer
(onto the spark plug lead of cylinder #1)
• exhaust attachment 2
(onto the exhaust pipe)
4. Install:
• fuel tank
Refer to “SEATS AND FUEL TANK”.
5. Start the engine and warm it up until the
specified oil temperature is reached.
6. Measure:
• engine idling speed
Out of specification → Adjust.
Refer to “ADJUSTING THE ENGINE
IDLING SPEED”.
Pocket tester
90890-03132
Engine tachometer
90890-06760
Exhaust attachment
90890-03134
Oil temperature
80 ~ 90 °C
Engine idling speed
1,000 ~ 1,100 r/min
7. Install:
• CO/HC tester 1
(onto the exhaust attachment)
Note: Not all bikes are equipped with the exhaust ports on the headers. Refer to
http://www.micapeak.com/bike/FJR1300/howto/rivnut.html for directions on how to add
them.