Filter
Top Products
4 - 56
CHAS
EAS00313
DISASSEMBLING THE CLUTCH RELEASE
CYLINDER
NOTE:
Before disassembling the clutch release cylin-
der, drain the clutch fluid from the entire clutch
system.
1. Remove:
• union bolt
1
• copper washers
2
• clutch hose
3
NOTE:
Put the end of the clutch hose into a container
and pump out the clutch fluid carefully.
2. Remove:
• clutch release cylinder piston
1
• clutch release cylinder spring
2
• clutch release cylinder piston seal
3
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Blow compressed air into the clutch hose
joint opening
a
to force out the piston from
the clutch release cylinder.
WARNING
@
• Cover the clutch release cylinder with a
rag. Be careful not to get injured when the
piston is expelled from the clutch release
cylinder.
• Never try to pry out the clutch release cyl-
inder piston.
b. Remove the clutch release cylinder spring
and piston seal.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
HYDRAULIC CLUTCH